Description

The SharkBite U860B5 is a 1/2-inch Copper Tube Size (CTS) blue PEX-A cross-linked polyethylene tubing stick, supplied in 5-foot lengths for potable water distribution systems. The tubing is printed with the SharkBite imprint pattern, a visual depth-insertion guide that confirms the tube is fully seated inside a SharkBite push-fit fitting before the connection is finalized. Rated for potable water applications, this flexible PEX tubing is well suited for residential and light commercial plumbing rough-in and repair work. Licensed plumbers and pipefitters are the primary installers.

This tubing is designed for use in hot and cold potable water supply lines where a push-fit or crimp-style connection is required. The 5-foot stick format is practical for tight-space repairs, fixture supply drops, and branch-line extensions where full coil lengths are impractical. The blue color coding indicates cold-water service by convention, simplifying identification during and after installation. Each package contains 10 sticks, providing 50 linear feet of tubing per package.

Key Features

Cross-linked polyethylene (PEX-A) construction rated for potable water applications
1/2-inch Copper Tube Size (CTS) diameter for compatibility with standard push-fit and crimp fittings
SharkBite imprint pattern provides a visual insertion-depth guide for push-fit fitting connections
Blue color coding indicates cold-water service for easy line identification
5-foot stick format suits repairs and short branch runs where coil tubing is impractical
Sold in packages of 10 sticks (50 linear feet per package)

Compatibility

Designed for use with SharkBite push-fit fittings and standard 1/2-inch CTS crimp or clamp-style PEX fittings in potable water systems. Suitable as an OEM-style supply tubing for residential and light commercial plumbing installations.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the International Plumbing Code (IPC). Shut off the water supply and relieve system pressure before cutting into any existing line. Use a dedicated PEX pipe cutter to produce a clean, square cut end before insertion into push-fit or crimp fittings. Verify full insertion depth using the printed imprint pattern before pressurizing the system.