Description
BALBOA/VICO | Impeller, 2 HP – RED STRIPE | PPUL20IMP
OPTIMUS 5190-036
VICO/BALBOA 1212218
OLD VICO PPUL20IMP
************************************************
GENERAL DESCRIPTION:
CLOSED FACE GRAY IImpeller, 2 HP
THE INLET OPENING IS DOUBLE STEPPED
THE SHAFT SIDE OF THE IImpeller IS FLAT
THE INLET SIDE SLOPES SLIGHTLY FROM THE EDGE TO THE INLET
THIS HAS A STRIPE ON THE SHAFT TO IDENTIFY THE IImpeller
************************************************
MATERIAL:
GRAY PLASTIC
TYPE: CLOSED FACE
NUMBER OF VANES: 5
************************************************
DIMENSIONS:
OUTSIDE DIAMETER 4-7/16″ (A)
TOTAL LENGTH: 3-3/8″
OUTSIDE THICKNESS AT EDGE: 1/2″ (B)
INSIDE THICKNESS AT EDGE: 9/32″
SHAFT LENGTH: 1-7/8″
SHAFT DIAMETER: 11/16″
INLET OPENING OUTSIDE DIAMETER: 2″
INLET OPENING INSIDE DIAMETER: 1-1/2″
THE INLET OPENING IS BEVELED ON THE INSIDE
THE SECOND STEP BELOW THE INLET IS 2-3/8″ DIAMETER
INLET OPENING LENGTH: 3/4″ (TOTAL OF BOTH STEPS)
EACH STEP IS ABOUT 3/8″
************************************************
MARKINGS:
STRIPES ON SHAFT
STARTING FROM THE END THESE ARE:
RED
SPECIAL NOTE: CURRENT IImpellerS ARE BEING MADE WITH
NO STRIPES ON THE SHAFT
