Description
Leak N Seal Swim N Spa 47240440 1 Pint of leak sealer for hot tubs.
This leak sealer product is added to spa water to repair minor leaks and cracks.
DIRECTIONS FOR USE1. Turn pump off. REMOVE cartridge or filter grids to avoidproduct from passing through the filtration system.2. If the leak location is unknown, add the recommended dosageto the skimmer. If you are sure of the location of the leak, pourthe recommended dosage directly into the water at the area ofthe leak.3. After 30 minutes following application, turn pump on and allowto run for at least 8 hours.4. Check pool or spa to see if it is still losing water. A secondapplication may be necessary and can be made within the next24 hours.5. Replace filter grids or cartridges after 24 hours and resumenormal filtration. Pool or spa may be entered 24 hours afterapplication.
DOSAGE AMOUNT
| Amount Of Gallons | Amount Of Product |
| 600 | 1 oz. |
| 750 | 1.5 oz |
| 1000 | 2 oz |
IMPORTANT NOTES:• Remove cartridge or filter grids to avoid product from passingthrough filtration system.• It is possible that fine fountain jets may block when this productis applied.
Of course if you can identify the leak, it is best to fix the leak at its source. See our hot tub plumbing section for PVC parts and manifolds you may need to complete a plumbing repair.
Leak Sealer and spa chemicals can only be shipped within the continental USA.
