Description

The SECO 10198764 is a single-sided carbide milling insert in the XOMX series, designed for use in indexable face and shoulder milling operations. It features a parallelogram insert shape with a positive rake angle of 15.5 degrees and a 15-degree relief angle, reducing cutting forces and improving chip evacuation in demanding applications. The insert carries a Duratomic TiCN/Al2O3/Chrome coating applied through Seco’s Duratomic coating process, targeting wear resistance and thermal stability. With two cutting edges and a right-hand cutting direction, it is suited for milling steel and other common workpiece materials. Licensed machinists and CNC tooling specialists are the primary installers.

This insert is intended for use in face milling and shoulder milling setups on machining centers and CNC mills processing steel as a primary material, with secondary compatibility in stainless steel, cast iron, superalloys, and titanium workpiece families. The MP3501 manufacturer grade and M14 chip breaker geometry are configured for medium to roughing-range material grades P20 through P40, K20 through K40. It is compatible with the R217/220.69-18 cutter series. The screw-held mounting method and standardized ANSI/ISO insert code XOMX180608TR-M14 make this insert straightforward to source and fit within existing tooling setups.

Key Features

Duratomic TiCN/Al2O3/Chrome coating for extended wear life in steel and mixed-material cuts
Positive rake angle (15.5 degrees) and T-Land cutting edge style reduce cutting forces and improve tool stability
M14 chip breaker geometry supports medium to rough milling passes in P20-P40 and K20-K40 material grades
Two cutting edges per insert maximize insert utilization before replacement
Right-hand cutting direction with screw-held insert mounting for secure, repeatable indexing
Meets ANSI and ISO standards; ANSI/ISO code XOMX180608TR-M14

Compatibility

Compatible with the R217/220.69-18 cutter series. Insert code XOMX180608TR-M14 conforms to ANSI and ISO standards for cross-reference and toolholder matching.

Installation Notes

Installation is performed by machining technicians or CNC tooling specialists. Power down and lock out the machine spindle before indexing or replacing inserts. Use the appropriate torx or hex key to torque the clamping screw to the toolholder manufacturer’s specification do not over-tighten, as this can crack the insert or damage the pocket seat. Inspect the insert pocket for wear or debris before seating a new insert to ensure proper contact and runout.

Technical Specifications

Insert Style: XOMX
Series: XOMX
Insert Size: 18
Insert Size Code: 180608
Insert Shape: Parallelogram
Insert Material: Carbide
Manufacturer Grade: MP3501
Material Grade: P20; P30; P40; K20; K30; K40
Coating/Finish: TiCN; Al2O3; Chrome
Coating Process: Duratomic
Corner Radius: 0.0315 inches (1/32 inch)
Inscribed Circle: 0.4409 inches
Length: 0.6693 inches
Width: 0.4409 inches
Thickness: 0.2520 inches
Hole Diameter: 0.1969 inches
Maximum Depth of Cut: 0.6693 inches
Cutting Edge Effective Length: 0.6693 inches
Number of Cutting Edges: 2
Rake Angle: 15.5 degrees
Relief Angle: 15 degrees
Rake: Positive
Cutting Edge Style: T-Land
Chip Breaker: M14
Cutting Direction: Right Hand
Insert Hand: Right Hand
Insert Holding Method: Screw
Single or Double Sided: Single
Included Angle: 90 degrees
Primary Workpiece Material: Steel
Secondary Workpiece Material: Stainless Steel; Cast Iron; Superalloys and Titanium
Cutter Series Compatibility: R217/220.69-18
ANSI/ISO Code: XOMX180608TR-M14
Weight: 0.03 pounds