Description

The MINWAX COMPANY, THE 71033 is a water based, oil modified polyurethane finish designed for wood floor and surface protection. It combines the easy application and low odor of a water based formula with the durability typically associated with oil based coatings. The satin sheen delivers a smooth, understated finish suited to residential and light commercial wood surfaces. Maximum VOC content is 275 g/L, keeping it compliant with many regional VOC regulations. Cleanup requires only water, reducing solvent handling on the job site. The ultra fast drying formula helps reduce downtime between coats.

This polyurethane is intended for use on interior wood floors, furniture, cabinets, and millwork where a durable protective topcoat is needed. The satin finish is a common specification in residential remodel and new construction projects. It is applied by flooring contractors, finish carpenters, and painters working on interior wood surfaces. The one gallon container size is standard for single-room or smaller multi-room applications, and the package quantity of 2 units per case supports efficient restocking for supply-house distribution.

Key Features

Water based, oil modified formula combines ease of use with enhanced durability
Satin sheen for a low-gloss, smooth surface appearance
Maximum VOC content of 275 g/L for broader regional compliance
Ultra fast drying to reduce recoat wait time
Low odor formulation suitable for occupied or semi-occupied job sites
Easy water cleanup eliminates need for solvent disposal

Compatibility

Designed as a protective topcoat for interior wood surfaces including floors, furniture, cabinets, and millwork. Verify surface preparation and primer compatibility per project requirements before application.

Installation Notes

Application is performed by flooring professionals, finish carpenters, or painters using brush, roller, or applicator pad per manufacturer application guidelines. Ensure adequate ventilation even with low odor formulas, and keep the work area free of dust before and during application. Allow each coat to dry fully before recoating or subjecting the surface to foot traffic. Dispose of used applicators and rinsate in accordance with local regulations.