Description
DISCONTINUEDAquaFlo XP2 volute faceplate 91231605 is no longer available. You will need to replace the complete Aquaflo XP2 wet end, see below.
Due to a design change in the current XP2/XP2e pump wet ends, face plate or volute replacement is not suggested. Instead, replace the wet end to avoid issues with how it fits.
48 Frame Wet Ends Available:
91041608-000 XP2 1.0hp 2″mbt 48fr
91041815 Gecko Aqua-Flo XP2/XP2E 1.5hp 2″mbt 48fr
91041820 Gecko Aqua-Flo XP2/XPE 2.0hp, 2″, 48fr
91041825 Gecko AquaFlo XP2/XP2E 2.5hp, 2″mbt, 48fr
91041830 Gecko AquaFlo XP2/XP2E 3.0hp, 2″mbt, 48fr
91041613 Gecko AquaFlo XP2, 4.0hp, 2″, 48fr
56 Frame XP2 Pump Wet Ends 6.1″ Diameter Available
91041622 Gecko AquaFlo FMXP2 2.0hp 2″mbt 6.1″dia 56fr
91041623 Gecko AquaFlo FMXP2 2.5hp 2″mbt 6.1″dia 56fr
91041624 Gecko AquaFlo FMXP2 3.0hp 2″mbt 6.1″dia 56fr
56 Frame XP2 Pump Wet Ends 6.3″ Diameter are unavailable.
2 inch connection
2-5/8″ ID on back side to receive impeller ring.
| Faceplate Fastening Type | 8 Screws |
| Suction Style | Center |
| Drain Plug Location | 5,6,8 o`clock |
| Suction Connection (Physical Dimension) | 3-1/16″od |
| Suction Connection Type | Male Buttress Thread (mbt) |
| Suction Pipe Size | 2″ |
| Manufacturer | AquaFlo/Gecko |
| Model | XP2 |
You will receive the compatible 91231606 when ordering this discontinued 91231605.
Replaces: 6000-151 91231605 Difference is ID measurements
Uses O-164 type housing oring.
Uses drain plug 92290070 and plug oring O-25.
You can use unions 52272000 if needed.
Typically, the manufacturer is recommending the replacement of the complete wet end instead of faceplate or volute replacement due to design changes in the XP2 and XP2e pump wet ends.
