Description

The RAINBIRD NATIONAL SLS 12SARVAPRO is an adjustable mini rotor sprinkler head designed for efficient, uniform irrigation coverage. It mounts on a 1800 Pro Series spray body with a 4 inch pop-up height and connects via a 1/2 inch inlet. The head delivers water through multiple rotating streams across a spray distance of 13 to 18 feet, reducing misting and fogging even at high operating pressures. This design minimizes runoff and promotes even soil absorption. Licensed irrigation contractors and landscape professionals install this type of head in residential and light commercial turf and groundcover zones.

The 12SARVAPRO is suited for residential and commercial irrigation systems where matched precipitation and low-runoff performance are priorities. Its key advantage is compatibility with large-rotor zones, allowing mixed-head zoning without creating dry or oversaturated areas. It fits standard 1800 Pro Series spray bodies and works across a range of operating pressures without producing the fine mist that leads to wind drift and water waste. Installers typically use it in turf beds, groundcover areas, and narrow strips where consistent coverage across varied distances is required.

Key Features

Adjustable spray pattern for flexible coverage across irregular zones
13 to 18 foot spray distance suits mid-range irrigation applications
4 inch pop-up height on 1800 Pro Series spray body keeps head protected when not in use
Multiple rotating streams distribute water uniformly to reduce runoff
No misting or fogging at high pressures, minimizing wind drift and water waste
Can be installed in the same zone as large rotors for simplified system design

Compatibility

Designed for use with the 1800 Pro Series spray body, featuring a 1/2 inch inlet connection. Compatible with standard irrigation zones that include large rotor heads.

Installation Notes

Installation should be performed by a licensed irrigator or qualified landscape contractor in accordance with local water authority and plumbing code requirements. Shut off the irrigation system water supply and relieve line pressure before replacing or installing any sprinkler head. Ensure the spray body is flush with or slightly below finished grade to prevent mower damage. Verify system operating pressure falls within the manufacturer-specified range before activating the zone.