Description

The SECO 03276010 is a CNMG431-MF2 series indexable turning insert manufactured from solid carbide with a multilayer CVD coating of TiCN, Al2O3, and Cr. The TP25 grade insert features an 80-degree diamond shape, a 0.5079-inch insert length, and a 0.5-inch inscribed circle diameter. The MF2 chip breaker geometry is engineered for medium finishing operations. With a chamfered and honed cutting edge, negative rake angle, and four usable cutting edges, this insert delivers consistent performance in steel, stainless steel, and cast iron applications. It is installed and replaced by machinists and CNC turning technicians in production shop environments.

This insert is suited for turning, facing, and boring operations on CNC lathes and manual turning centers where a CNMG-style seat is present. Primary workpiece material is steel (ISO P class), with secondary application in stainless steel (M class) and cast iron (K class). Recommended material grades are P20, P30, and P35. The MF2 chip breaker geometry targets finishing to light roughing passes where chip control in ductile materials is a priority. The ISO code equivalent is CNMG120404-MF2 and the industry standard number is CNMG431-MF2.

Key Features

Multilayer CVD coating: TiCN, Al2O3, and Cr for wear resistance and thermal stability
TP25 carbide grade suited for P20, P30, and P35 steel classifications
MF2 chip breaker geometry for medium finishing in steel and stainless steel
Four cutting edges per insert for extended tool life per unit cost
Chamfered and honed edge prep for edge toughness and reduced built-up edge
Compatible insert holding methods: clamp, pin, and lever lock toolholders
Conforms to ANSI and ISO standards; ISO code CNMG120404-MF2

Compatibility

Designed for use in CNMG-style toolholders that accept a 0.5-inch inscribed circle, 80-degree diamond insert with a 3/16-inch thickness and 0.2028-inch hole diameter. Compatible holding methods include clamp, pin, and lever lock systems. Applicable to turning, facing, and boring operations on steel (P class), stainless steel (M class), and cast iron (K class) workpieces.

Installation Notes

Installation is performed by a qualified machinist or CNC turning technician. Power down and lock out the machine spindle before indexing or replacing inserts. Use the appropriate torque driver or clamping screw specified by the toolholder manufacturer to secure the insert do not overtighten or use an incorrect key, as this can fracture the insert or damage the pocket seat. Inspect the toolholder pocket and seating surface for chips or wear before installing a new insert.

Technical Specifications

Insert Style: CNMG
Series: CNMG-MF2
Industry Standard Number: CNMG431-MF2
ISO Code: CNMG120404-MF2
Manufacturer Grade: TP25
Insert Material: Carbide
Coating: TiCN, Al2O3, Cr (Multilayer CVD)
Insert Shape: Diamond 80 degrees
Insert Shape Code: C
Included Angle: 80 degrees
Inscribed Circle: 0.5000 inches (1/2 inch)
Insert Length: 0.5079 inches
Insert Thickness: 0.1875 inches (3/16 inch)
Corner Radius: 0.0157 inches (1/64 inch)
Hole Diameter: 0.2028 inches
Maximum Depth of Cut: 0.4921 inches
Relief Angle: 0 degrees
Rake: Negative
Rake Angle: 18 degrees
Clearance Code: N
Tolerance Code: M
Chip Breaker: MF2
Cutting Edge Style: Chamfered and Honed
Number of Cutting Edges: 4
Insert Hand: Neutral
Wiper Edge: No
Full Radius: No
Primary Workpiece Material: Steel (P class)
Secondary Workpiece Material: Stainless Steel (M class), Cast Iron (K class)
Material Grade: P20, P30, P35
Multi-Use Application: Boring, Facing, Turning
Insert Holding Method: Clamp, Pin, Lever Lock
Standards: ANSI, ISO
Weight: 0.02 pounds
Package Quantity: 1
Minimum Order Quantity: 10