Description

The KWIKSET 200P 11P CP V1 is a Polo-style passage knob lockset finished in Venetian Bronze, designed for interior doors that require turn-free passage without a keyed or privacy function. Rated Grade 3, this lockset ships with an adjustable steel latch that fits both 2-3/8-inch and 2-5/8-inch backsets, making it adaptable to standard pre-bored door preparations. A snap-on metal collar supports drive-in installation, and a round corner strike is included. It carries both a lifetime mechanical warranty and a lifetime finish warranty. Installation is straightforward for door hardware technicians, general contractors, and experienced DIYers working on residential interior doors.

The Polo passage knob is suited for residential interior applications such as hallways, closets, and other interior doors where latch function is needed but locking is not required. The Venetian Bronze finish coordinates with common door hardware finishes used in residential remodel and new construction. The adjustable latch accommodates the two most common backset dimensions found in residential door prep, reducing the need for separate SKUs on a typical job site. Sold in a clear pack configuration with a package quantity of 6 units per case.

Key Features

Polo knob style in Venetian Bronze finish with lifetime finish warranty
Grade 3 rated passage function no lock cylinder, turn-free operation
Adjustable round corner steel latch fits 2-3/8-inch and 2-3/4-inch backsets
Snap-on metal collar included for drive-in latch installation
Round corner strike plate included
Lifetime mechanical warranty

Compatibility

Designed as an OEM-style replacement or new-installation passage knob for standard residential interior doors with a 2-3/8-inch or 2-3/4-inch backset and a common cylindrical bore preparation.

Installation Notes

Installation is performed by door hardware technicians, general contractors, or qualified DIYers using standard hand tools. Confirm the door bore diameter and backset measurement before installation, and set the latch to the correct backset position before driving it into the door edge. No special power tools or specialty codes apply to passage knob installation, but local building codes should be confirmed for any commercial or multi-family application.