Description
The ALARM CONTROLS CORPORATION TS-14302LUC is a door holder and alarm assembly combining a TS-14 electromagnetic door holder mounted on a 302 stainless steel push plate with an LUC (local unlock control) plate. It is designed to hold open fire or egress doors during normal building operation and release them automatically upon alarm activation. Licensed electricians and door hardware technicians install this type of device as part of a building’s fire alarm or access control system. The stainless steel construction makes it suitable for high-traffic commercial and institutional corridors where durability and finish consistency are required.
This assembly is used in commercial and institutional buildings where code-compliant door hold-open and automatic release functionality is required at fire-rated or smoke-barrier doors. Typical installations include hospital corridors, school hallways, office building egress paths, and other environments governed by fire and life safety codes. The integrated LUC plate provides a local manual release point at the door, allowing building staff to release the door holder without triggering the broader fire alarm system. The stainless steel push plate surface resists corrosion and wear in high-contact environments.
Key Features
- TS-14 electromagnetic door holder integrated onto a 302 stainless steel push plate
- LUC (local unlock control) plate included for manual release at the door
- Stainless steel construction for corrosion resistance and durability in high-traffic areas
- Designed for automatic release upon fire alarm signal activation
- Sold as a single assembled unit (EA)
Compatibility
Designed as an OEM-style door holder alarm assembly for commercial fire-rated and egress door applications requiring electromagnetic hold-open and automatic release functionality. No specific compatible model numbers or system families were provided in the product data.
Installation Notes
Installation should be performed by a licensed electrician or certified fire alarm technician in accordance with NFPA 72, NFPA 80, and applicable local fire and building codes. Disconnect and lock out all power to the door holder circuit and the connected fire alarm control panel before beginning installation or service. Verify that the electromagnetic holding force and plate mounting height comply with ADA and local accessibility requirements before finalizing the installation.
Technical Specifications
- Material: 302 Stainless Steel
- Unit of Measure: Each (EA)
- Quantity Per Unit: 1
- Product Category: Door Closers / Holders / Alarms
Standard Information
- Brand: ALARM CONTROLS CORPORATION
- Manufacturer Part Number: TS-14302LUC
