Description
The CHARLOTTE PIPE FOUNDRY CO. PVC 02118 1600HA is a 1-1/2 inch white PVC spigot plug designed to terminate and seal the open end of a PVC pipe. It creates a pressure-tight seal at pipe termination points, preventing flow, contamination, or pressure loss. Manufactured to meet ASTM D 2466 standards, this plug is suitable for use in sprinkler and irrigation piping systems where a clean, reliable end-cap solution is required. Plumbers, irrigation contractors, and landscape irrigation technicians are the primary installers of this fitting.
This spigot plug is used in residential and commercial sprinkler and irrigation system piping. It is well suited for capping lateral lines, zone terminations, or any 1-1/2 inch PVC pipe end that requires a secure seal. The white color is standard for Schedule 40 PVC irrigation fittings and integrates cleanly into typical above-ground and below-ground irrigation assemblies. It is sold in a package quantity of 25 units, making it a practical option for contractors working on multi-zone irrigation installations.
Key Features
- Seals the open end of a 1-1/2 inch PVC pipe to stop flow and prevent contamination
- Meets ASTM D 2466 standards for PVC pressure fittings
- Spigot end design for direct insertion into a socket fitting or pipe end
- White finish consistent with standard Schedule 40 PVC irrigation fittings
- Sold in a package of 25 units for jobsite and contractor efficiency
Compatibility
Designed as an OEM-style replacement and standard-fit plug for 1-1/2 inch Schedule 40 PVC piping systems used in sprinkler and irrigation applications conforming to ASTM D 2466.
Installation Notes
Installation is performed by plumbers or irrigation contractors using standard PVC solvent cement per manufacturer and applicable code requirements. Depressurize and shut off the water supply to the line before installing or removing any fittings. Apply PVC primer and solvent cement to both the spigot and receiving socket in accordance with ASTM D 2564 procedures. Allow adequate cure time before restoring system pressure.
Technical Specifications
- Pipe Size: 1-1/2 inches
- End Type: Spigot
- Color: White
- Material: PVC
- Standard: ASTM D 2466
- Package Quantity: 25 EA
- Weight: 2.82 pounds
Standard Information
- Brand: CHARLOTTE PIPE FOUNDRY CO.
- Manufacturer Part Number: PVC 02118 1600HA
