Name: Merit Abrasives 08834123025 Flap Wheel 120 Grit 6x1.5 in
Brand: freshpoolstore.com
SKU: T8000552
Price: 9.24 USD
Availability: InStock

Description

The MERIT ABRASIVES 08834123025 is a coated, unmounted aluminum oxide flap wheel designed for surface finishing, blending, and deburring on metal and other hard materials. At 6 inches in outside diameter and 1.5 inches in width, with a 1-inch center hole for mandrel mounting, this wheel delivers fine-grade, 120-grit cutting action across a broad contact surface. Cloth backing provides flexibility and durability during use. Rated to a maximum of 6,000 RPM, it is suited for use on angle grinders and bench-mounted spindles in fabrication, maintenance, and finishing applications.

This flap wheel is used in metal fabrication shops, maintenance facilities, and manufacturing environments where consistent surface preparation is required. It is well matched for deburring edges, blending weld seams, and finishing interior or exterior curved surfaces on steel, aluminum, and similar materials. The fine 120-grit removes light stock while leaving a smooth surface finish. Trade professionals including machinists, welders, pipefitters, and maintenance technicians commonly use this wheel type in production and repair settings.

Key Features

Aluminum oxide abrasive material for reliable cutting performance on metal surfaces
Fine grade, 120 grit for light stock removal and smooth surface finishing
Cloth backing for flexibility and durability during extended use
6-inch outside diameter with 1.5-inch width for broad surface contact
1-inch center hole for standard mandrel or spindle mounting
6,000 RPM maximum speed rating for compatibility with common grinders and spindle equipment

Compatibility

Designed as an unmounted flap wheel for use with compatible mandrels or spindle fixtures accepting a 1-inch bore, suitable for standard bench grinders, drill presses, and angle grinder spindle setups that accommodate this wheel size and RPM rating.

Installation Notes

Mounting and use of abrasive flap wheels should be performed by qualified personnel familiar with abrasive tool safety standards. Verify that the spindle or mandrel RPM rating meets or exceeds the 6,000 RPM maximum rating of this wheel before operation. Always inspect the wheel for damage before mounting, ensure proper secure fitment on the mandrel, and use appropriate eye and face protection during operation. Follow applicable ANSI B7.1 safety requirements for the use, care, and protection of abrasive wheels.