Description
Some installations of the BRS1 retrofit kit may require a plumbing kit. If you have been referred to this part number, then you will receive following in this add-on kit so that your pack will match your existing plumbing configuration.
- Includes 3 plumbing pieces between the pump and heater because of the change in heater length. (90 degree elbow and 45 degree elbow and heater tailpiece for 2 inch plumbing)
- Includes adapter cords for the pump and ozonator
Kit also includes a light cord with amp plug 060020 – 8 ft. long, 2 phillips screws, 1 pump operating sheet, a pump union 45 degree, a 2 inch 90 degree elbow, a heater tailpiece and a JJ to AMP pump cord adapter as well as a JJ to AMP ozonator cord adapter.
This kit is used in Nordic Impulse and by other Nordic Hot Tub models when installing the retrofit BRS1 spa pack/ kit.
Typically this retrofit is needed when installing a BRS1 retrofit kit on tubs that are converting from the U-Class pack to the new BRS1 Balboa system. U-Class pack was a Gecko Micro Pack 070070.
